Indoor Water Feature System Kits: Glass Surfaces 2017-09-08T15:13:42+00:00

Water Feature Systems

Reveal 6 Pro: Glass Systems

Our most durable system for high-load, high-height tempered glass surfaces. Fabricated from stainless steel and equipped with welded fnpt fittings installed as required for each individual water feature installation. The top surface of the lower basin features a linear grain finish. The access cover is reversible to provide a tray to contain river rock (river rock by others) and is removable for required service access. Our stainless steel waterfall system components are not currently available for quick ship however lead times are typically minimal.

indoor waterfall kits described

Sizes:

  • Available Lengths from 3’-4” to 12’-0”.
  • Custom Lengths greater than 12’-0” possible.
  • Overall water feature height is user defined.
  • Glass panel height dimension as required
  • Materials:

    • Lower basin: stainless steel.
    • Upper basin: stainless steel.

    Allowable Surfaces:

    • Tempered Glass: 1/2” only- flat polished.
    • Multiple glass panels as required.
    • Multiple panel design: butt-glazed to custom spacing.
    • System designed for 1/2″ thick glass only.
    • Single glass panel width dimension limited to 6′-0″

    System Weights:

    • Lower basin: 25 # / L.F.
    • Upper basin:5 # / L.F.
    • Total (operating load): varies based on glass height

    Floor Deflection Limits:

    • All systems: L/480 LL+DL.
    • Note: installations should be planned for areas
      where floor deflection is limited to L/480 or less.

    Installation Locations:

    • Interior: yes
    • Exterior: yes

    Mechanical:

    • Automatic Fill: yes
    • Drain Connection: yes
    • Water Supply: 1/2″ cold water to reverse osmosis
    • Electrical: GFCI circuit required
    • Electrical specifications and requirements will vary based on overall width and height of waterfall.
    • Connections to building water supply and sanitary are optional but highly recommended to minimize required maintenance and to provide overflow protection.

    Warranty:

    1 year parts and labor limited warranty.

    Reveal 6 for Glass

    standard components:

    Every order includes all the essential components to install a professional indoor water feature. We also offer optional equipment depending on the installation. Here’s what’s included:

    acrylic water feature system for glass

    Submittals are expertly prepared by our experienced staff. We fully understand all construction types and use groups and as a result our water feature submittals and indoor water feature kits are accurately produced to integrate within the context of your building and construction detail requirements. Shop drawings for how to build an indoor waterfall typically include plans, sections, elevations and large scale details shown within the actual building location including relevant adjacency (shop drawings only). Our component drawings are included at no additional cost and are standard for every order. Detailed shop drawings are included as an option for all orders and pricing is based on the level of detailed required for each individual installation. Learn morefind out more about indoor waterfall designs

    acrylic water feature system for tile

    Our most durable system for high-load, high-height tempered glass facings. Fabricated from stainless steel and equipped with welded fnpt fittings installed as required for each individual water feature installation. The lower basins are shipped fully equipped with all internal plumbing and pumps installed, including an automatic float valve to regulate water level and a standard drain / overflow connection. The top surface of the lower basin features a linear grain finish. The access cover is reversible to provide a tray to contain river rock (river rock by others) and is removable for required service access.

    acrylic indoor water feature kits system for tile

    The stainless steel upper basin is equipped with a welded mounting flange, welded fittings and integral manifold for precise and even water distribution along the entire water feature glass surface. A built-in channel designed for 1/2″ glass assures positive placement of the glass during installation. A standard quick-connect drain connection allows water within the upper basin to drain back to the lower basin when the water feature is not in use. The overall length of the upper basin component is determined by the length of the lower basin and is generally 6″ less- refer to specifications above.

    acrylic water feature system for tile

    All stainless steel indoor water feature kits systems are fabricated with a removable access cover / tray, finished on both sides and designed to be convertible for different applications. The flush surface cover configuration can be use as an exposed finish or may be inverted to provide a removable tray to contain river rock or other finish materials. The standard stainless steel tray / cover is required for the operation of the waterfall. Stainless steel water feature lower basin for glass shown.

    Our quality asynchronous submersible pumps are virtually silent, energy efficient and are designed to operate 24/7. Each pump(s) is specified based on the overall width and height of the water feature and multiple pumps are typically required for indoor water feature kits over 72″ in length.

    Waterproofing membrane (tile facing water features only) not required for glass facing water features.

    Additional hardware included: 3/8″ PEX tubing, underwater sealant, stainless screws, stainless steel mounting brackets (acrylic systems for glass only).

    origin falls water feature water purity systems

    Origin Falls was first to introduce an ozone based water purification system designed specifically for purifying water in our water walls and we continue to innovate with our Pure Water Systems™ for indoor water feature kits. Designed into each of our indoor waterfalls are the most advance ozone sanitation systems. It is a well known fact that ozone effectively kills legionella. Since 2001 Origin Falls has been collaborating with a leading ozone system manufacturer to incorporate the latest ozone technology into all of our products. We have developed a system using proprietary technology that is completely reliable and low maintenance. Our ozone systems provide sanitation and disinfection in multiple applications, with no negative impact on the environment. These benefits accrue across all our core products, leading to lower costs, better health, protection from litigation, fewer negative outcomes, and knowing for sure that your sanitation requirements are met. Find out more about ozone and ozone water purification and how we exceed industry standards.
    learn more
    infection control for indoor water feature kits

    origin falls water feature water purity systems

    Our waterfall systems include as optional equipment a simple to maintain reverse osmosis water purifying system specifically design for our diy indoor water feature kits and indoor water feature systems.
    learn more
    water filtration systems for indoor waterfalls

    Our built-in drain pump system includes a small auxiliary pump that is internally connected to the lower basin overflow drain to provide for simple mechanical removal of the water feature water for the purposes of maintenance and routine cleaning. This pump can also be programmed to automatically remove a small quantity of water from the reservoir and replenish it with fresh water at intervals determined by the user.

    Our work doesn’t stop at the loading dock. After the many hours we have spent building your indoor water feature kits, we want it to arrive in perfect condition. We carefully crate each waterfall in our facility and supervise the loading.

    Friendly and knowledgeable support is available prior to purchase and for the life of your waterfall. Our excellent support is one of the many reasons for our success. Find out how to build using indoor water feature kits and more about our indoor waterfall designs.

    Typical Indoor Water Feature Kits System Configurations

    design options for Reveal 6 Pro professional water feature system installations:

    Just the details.

    Origin falls routinely assist architects during the schematic and design development phases to accurately prepare their construction documents for basic mechanical and functional installation requirements for our indoor water features. Competent indoor waterfall designs and indoor water feature kits is critical to the success of any significant indoor waterfall project. Our level of experience and attention to detail is a testament to our dedication to the art of our contemporary water features. Included here are some typical sections and plans to help you better understand how our water feature systems can be implemented into your project. View and download additional installation examples from our AutoCAD library of indoor water feature kits construction detail drawings.

    All CAD Filesdownload additional AutoCAD drawings for indoor water feature kits

    indoor water feature kits on floor installations

    Section- Floor Level

    • 3 5/8″ metal stud frame minimum dimension (back supporting wall).
    • Wet wall substrate as specified on shop drawings.
    • Adjacent finishes / context as required.
    • Interior and exterior installations.
    • Fittings do not exit bottom surface of lower basin.

    indoor water feature kits above floor installations

    Section- Above Floor

    • 3 5/8″ metal stud frame minimum dimension (back supporting wall).
    • Wet wall substrate as specified on shop drawings.
    • Adjacent finishes / context as required.
    • Interior and exterior installations.
    • Fittings do not exit bottom surface of lower basin.

    indoor water feature kits below floor installations

    Section- Below Floor

    • 3 5/8″ metal stud frame minimum dimension (back supporting wall).
    • Wet wall substrate as specified on shop drawings.
    • Adjacent finishes / context as required.
    • Interior and exterior installations.
    • Fittings do not exit bottom surface of lower basin.

    indoor water feature kits recessed installation

    Plan- Recessed Installation

    • 3 5/8″ metal stud frame minimum dimension (back supporting wall).
    • Wet wall substrate as specified on shop drawings.
    • Fittings exit as required, options: left (shown), right, front, back.
    • Adjacent finishes / context as required.
    • Interior and exterior installations.
    • Fittings do not exit bottom surface of lower basin.

    indoor water feature kits surface installation

    Plan- Surface Installation

    • 3 5/8″ metal stud frame minimum dimension (back supporting wall).
    • Wet wall substrate as specified on shop drawings.
    • Fittings exit as required, options: left, right (shown), front, back.
    • Adjacent finishes / context as required.
    • Interior and exterior installations.
    • Fittings do not exit bottom surface of lower basin.

    indoor water feature kits see thru

    Plan- See Thru Installation

    • 3 5/8″ metal stud frame minimum dimension (back supporting wall).
    • Wet wall substrate as specified on shop drawings.
    • Fittings exit as required, options: left, right, front, back (shown).
    • Adjacent finishes / context as required.
    • Interior and exterior installations.
    • Fittings do not exit bottom surface of lower basin.

    error: Contact Origin Falls for Image Copies